Test	Requirement of IS 2202	Test Results
Dimensions & Squareness	Length, width: +/-5 mm Thickness: +/- 1 mm Squareness: 1mm at a length of 500 mm	Length, width: +/-5 mm Thickness: +/- 1 mm/-0.2 mm Squareness: < 1mm at a length of 500 mm
General Flatness	< 6.0 mm	<4.0 mm
Local Planeness	< 0.5 mm	< 0.3 mm
Impact indentation	< 0.2 mm	< 0.2 mm
Edge Loading Test	Max. Deflection -< 5.0 mm Residual Deflection -< 0.5 mm Lateral bucking -< 2.0 mm	Max. Deflection -< 3.0 mm Residual Deflection -< 0.3 mm Lateral bucking -< 1.0 mm
Shock Resistance Test	Should withstand 5 impacts	Can withstand 15 impacts
Misuse Test	Pass	Excellent
End Immersion Test	No delamination in one cycle	Can undergo three cycles without any delamination
Knife / Glue Adhesion - Test	Pass	Excellent
Screw Withdrawal Resistance	>1000 N	> 1500 N